ASA 777K BK33753 INEOS STYRO KOREA

Form：Granules | Grade：Injection grade

Properties:

High mobilityHighlightSpray free

Typical Applications:

Antenna shell

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Antenna shell
Properties:	High mobility \| Highlight \| Spray free

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C	ISO 179	4.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	ISO 179	17	kJ/m²
Impact strength of cantilever beam gap	-30°C	ISO 180/A	4.0	kJ/m²
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	23°C	ISO 180/A	14	kJ/m²
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	2300	Mpa
tensile strength	Yield,23°C	ISO 527-2	48.0	Mpa
Tensile strain	Yield,23°C	ISO 527-2	3.3	%
Tensile creep modulus	1hr	ISO 899-1	1850	Mpa
Tensile creep modulus	Tensile creep modulus	1000hr	ISO 899-1	1400	Mpa
bending strength		ISO 178	70.0	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Annealed	ISO 75-2/B	101	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Annealed	ISO 75-2/A	97.0	°C
Vicat softening temperature	--	ISO 306/A50	105	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/B50	97.0	°C
Linear coefficient of thermal expansion	MD	ISO 11359-2	8.0E-5to1.1E-4	cm/cm/°C
thermal conductivity		DIN 52612	0.17	W/m/K
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.07	g/cm³
Melt Volume Flow Rate (MVR)	220°C/10.0kg	ISO 1133	15.0	cm3/10min
Shrinkage rate		ISO 294-4	0.50-0.90	%
Water absorption rate	Saturation,23°C	ISO 62	1.7	%
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.35	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		IEC 60093	1E+13	ohms
Volume resistivity		IEC 60093	1E+14	ohms·cm
Dielectric constant	100Hz	IEC 60250	3.70
Dissipation factor	100Hz	IEC 60250	0.011
Dissipation factor	Dissipation factor	1MHz	IEC 60250	0.024
hardness	Test Condition	Test Method	Test Result	Test Unit
Ball Pressure Test		ISO 2039-1	80.0	Mpa
film	Test Condition	Test Method	Test Result	Test Unit
elongation	Break	ISO 527-3	9.0	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top