Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.80to2.00 g/cm³ |
| Shrinkage rate | | ASTM D955 | 0.050to0.20 % |
| Water absorption rate | | ASTM D570 | 0.10to0.30 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Barcol Hardness | | ASTM D2583 | 30to60 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| burning rate | | ASTM D635 | 7.9 mm/min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 58.6 MPa |
| compressive strength | | ASTM D695 | 55.2 MPa |
| tensile strength | | ASTM D638 | 31.0 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of cantilever beam gap | | ASTM D256 | 210 J/m |
| Suspended wall beam without notch impact strength | | ASTM D4812 | 430 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | >204 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare