PP Copolymer Piolen® P T30LA47 PiO Kunststoffe GmbH & Co KG
0
- Properties:FillerPiOKunststoffeGerman PiOKunststoffe
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO 1133 | 12 g/10min | |
| density | ISO 1183 | 1.14 g/cm³ |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO 527-2 | 2100 MPa | |
| tensile strength | Yield | ISO 527-2 | 18.2 MPa |
| Break | ISO 527-2 | 15.0 MPa | |
| Tensile strain | Yield | ISO 527-2 | 4.4 % |
| Break | ISO 527-2 | 23 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179 | 1.6 kJ/m² | |
| ISO 179 | 8.7 kJ/m² | ||
| Impact strength of simply supported beam without notch | ISO 179 | 24 kJ/m² | |
| ISO 179 | 50 kJ/m² |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO 306/A50 | 143 °C | |
| ISO 306/B50 | 62.0 °C | ||
| Crystallization peak temperature | ISO 3146 | 160to170 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top