TSC

TSC 2M Hong Kong Huayi

Properties:
Before injecting high transparency TSC-M material thoroughly clean the machine with GPPS (especially if the machine has produced transparent ABS transparent HIPS Yajiali SAN material etc.) to ensure that there are no residual materials in the barrel that affect the maximum transparency of TSC-M
Compare

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result
Transmittance rate		ASTM D-1003	92% 1/8"
turbidity		ASTM D-1003	1.2

mechanical properties	Test Method	Test Result
tensile strength	ASTM D-638	41.2 MPa
Elongation at Break	ASTM D-638	60 %
bending strength	ASTM D-790	60 MPa
Impact strength of cantilever beam gap	ASTM D-256	6.5 kg.cm/cm
Bending modulus	ASTM D-790	2020 MPa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	HDT	ASTM D-648	75.5 ℃
Vicat softening temperature		ASTM D-1525	91 ℃
melt mass-flow rate		ASTM D-1238	5 g/10min

Physical properties	Test Condition	Test Method	Test Result
Shore hardness			74 Shore D
density		ASTM D-792	1.04

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top