TP, Unspecified GS 2189
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ISO1133 | 15到40 g/10min | |
| Particle size | 2.00到3.00 mm | ||
| density | ISO1183 | 1.20到1.40 g/cm³ | |
| Apparent density | ISO60 | 0.88到0.94 g/cm³ |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of simply supported beam without notch | ISO179 | 75 kJ/m² | |
| ISO179 | 140 kJ/m² |
| Filling analysis | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Melt density | ISO1133 | 1.10到1.30 g/cm³ |
| film | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Carbon dioxide transmission rate | ASTMD1434 | 150到200 cm³/m²/24hr | |
| ASTMF1927 | 40.0到60.0 cm³/m²/24hr | ||
| Film thickness - tested | ISO2286-3 | >10 µm | |
| tensile strength | DIN53455 | 40.0到50.0 MPa | |
| DIN53455 | 35.0到45.0 MPa |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ISO306/A120 | 60.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top