
PBT/PET CN5330 JAPAN POLYPLASTIC
56
Form:Granules | Grade:Flame retardant enhanced grade
Properties:
enhanceGlass fiber reinforcedHigh glossExcellent appearanceFlame retardantFiller: Glass fiber reinf30%Filler by weight
Typical Applications:
Automotive sectorElectrical fieldElectronic fieldHousehold appliancesHousehold appliances
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive sector | Electrical field | Electronic field | Household appliances | Household appliances |
| Properties: | enhance | Glass fiber reinforced | High gloss | Excellent appearance | Flame retardant | Filler: Glass fiber reinf | 30% | Filler by weight |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Bending modulus | ISO 178 | 9940 | Mpa | |
| Tensile strain | Break | ISO 527-2 | 1.8 | % |
| tensile strength | ISO 527-2 | 138 | Mpa | |
| bending strength | ISO 178 | 212 | Mpa | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | TD:23to55°C | Internal Method | 7E-05 | cm/cm/°C |
| MD:23to55°C | Internal Method | 2E-05 | cm/cm/°C | |
| Hot deformation temperature | 1.8MPa,Unannealed | ISO 75-2/A | 205 | °C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Water absorption rate | 23°C,24hr | ISO 62 | 0.20 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric strength | 3.00mm | IEC 60243-1 | 21 | KV/mm |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Rockwell hardness | M-Scale | ISO 2039-2 | 100 |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.