PA66 GR-30
0
- Properties:Made by using nylon resin as the base materialadding glass fiber and other additivesand produced by a twin screw extruder
- Usages:Used for military productsautomotive componentselectric toolstextile equipmentand other mechanicalchemicallight industryand electrical components
CompareTechnical Data Sheet
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| bending strength | 220 MPa | ||
| tensile strength | 155 MPa | ||
| Suspended wall beam without notch impact strength | 50 KJ/m |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Glass Fiber Content | 30±3 WT% |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Heat distortion temperature | 230 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top