PPSU R-5100 BK937 SOLVAY USA

Form：Granules | Grade：Injection grade

Properties:

Resistance to stress cracThermal stabilityHigh impact resistance

Typical Applications:

Medical devicesElectrical applicationshousehold electrical appliances

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Medical devices \| Electrical applications \| household electrical appliances
Properties:	Resistance to stress crac \| Thermal stability \| High impact resistance

Certificates

No Data...

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
Refractive index		ASTM D542	1.672
impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256	690	J/m
	Impact strength of cantilever beam gap		ASTM D256	NoBreak
	Impact strength of cantilever beam gap	Impact strength of cantilever beam gap		ASTM D1822	399	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.75mm	UL 94	V-0
Extreme Oxygen Index		ASTM D2863	38	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ASTM D638	2340	Mpa
tensile strength	Yield	ASTM D638	69.6	Mpa
tensile strength	tensile strength	Break	ASTM D638	69.6	Mpa
elongation	Yield	ASTM D638	7.2	%
elongation	elongation	Break	ASTM D638	60	%
Bending modulus		ASTM D790	2410	Mpa
bending strength	Yield	ASTM D790	91.0	Mpa
Compressive modulus		ASTM D695	1730	Mpa
compressive strength		ASTM D695	98.9	Mpa
shear strength		ASTM D732	62.7	Mpa
Poisson's ratio		ASTME132	0.42
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	214	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	207	°C
Glass transition temperature		ASTME1356	220	°C
Linear coefficient of thermal expansion	MD	ASTM D696	5.6E-05	cm/cm/°C
thermal conductivity		ASTMC177	0.35	W/m/K
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D1238	14to20	g/10min
Shrinkage rate	MD	ASTM D955	0.70	%
Water absorption rate	24hr	ASTM D570	0.37	%
density		ASTM D792	1.30	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	9E+15	ohms·cm
Dielectric strength		ASTM D149	14	KV/mm
Dielectric constant	60Hz	ASTM D150	3.44
Dielectric constant	Dielectric constant	1kHz	ASTM D150	3.40

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top