Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO1133 | 30 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ISO2039-2 | 95 |
| other | Test Condition | Test Method | Test Result |
|---|
| | | 耐冲击性、高刚性、抗静电剂 |
| purpose | | | 应用于日用品、轻量周转箱、家电零部件、工业零部件 |
| Basic performance | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ISO 1133 | 30 g/10min |
| density | | ISO 1183 | 0.910 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ISO 527 | 28 Mpa |
| tensile elongation | | ISO 527 | 30 % |
| Izod notch impact strength | | ISO 179 | 7.5 KJ/m |
| Load resistant bending temperature | | ISO 75 | 105 °C |
| hardness | | ISO 2039-2 | 95 |
| Tensile modulus | | ISO527-2 | 1450 Mpa |
| Tensile stress | | ISO527-2 | 28.0 Mpa |
| Tensile strain | | ISO527-2 | 30 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179 | 4.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179 | 7.5 kJ/m² |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 910 |
| melt mass-flow rate | | ASTM D1238/ISO 1133 | 30 g/10min |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/B | 105 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices