Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792,ISO1183 | 1.37 g/cm³ |
| Water absorption rate | | ASTMD570,ISO62 | 0.80 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| Limiting Oxygen Index | | ASTMD2863,ISO4589-2 | 23 % |
| UL flame retardant rating | | UL94 | HB |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Charpy Notched Impact Strength | | ISO179 | 11 kJ/m² |
| CharpyUnnotched | | ASTMD256 | 35.0 kJ/m² |
| Charpy Notched Impact Strength | | ASTMD256 | 11.0 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179 | 35 kJ/m² |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | Break | ASTMD638,ISO527-2 | 180 MPa |
| elongation | Break | ASTMD638,ISO527-2 | 3.0 % |
| Flexural modulus | | ASTMD790,ISO178 | 8000 MPa |
| bending strength | | ASTMD790,ISO178 | 240 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257,IEC60093 | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2117,ISO1218 | 260 °C |
| | ASTMD696 | 2.5E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare