
Product Description
Certificates(0)
Datasheet
Product Description
Certificates
No Data...
Technical Data Sheet
| impact performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| Impact strength of simply supported beam without notch | 23°C | kJ/m² | 45 | |
| -30°C | kJ/m² | 40 | ||
| flammability | Test Condition | Test Method | Test Result | Test Unit |
| Extreme Oxygen Index | % | 37 | -- | |
| Hot filament ignition temperature | 3.00mm | °C | 775 | -- |
| 0.400mm | °C | 700 | -- | |
| Burning wire flammability index | 3.00mm | °C | 960 | -- |
| 0.400mm | °C | 960 | -- | |
| Flammability level | 1.50mm | V-0 | -- | |
| 0.400mm | V-0 | -- | ||
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| bending strength | 225 | MPa | ||
| Bending modulus | MPa | 9800 | 10800 | |
| Tensile strain | Break | % | 2.1 | 1.9 |
| tensile strength | Break | 145 | MPa | |
| Tensile modulus | MPa | 10700 | 11300 | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Linear coefficient of thermal expansion | MD:55to160°C | cm/cm/°C | 1.2E-05 | -- |
| TD | cm/cm/°C | 6.2E-05 | -- | |
| TD:-40to23°C | cm/cm/°C | 6E-05 | -- | |
| TD:55to160°C | cm/cm/°C | 9.5E-05 | -- | |
| MD:-40to23°C | cm/cm/°C | 1.8E-05 | -- | |
| RTI Elec | 3.00mm | °C | 140 | -- |
| 1.50mm | °C | 140 | -- | |
| 0.750mm | °C | 140 | -- | |
| 0.400mm | °C | 140 | -- | |
| Linear coefficient of thermal expansion | MD | cm/cm/°C | 1.8E-05 | -- |
| Melting temperature | °C | 310 | -- | |
| Hot deformation temperature | 1.8MPa,Unannealed | °C | 281 | -- |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | MD | % | 0.30 | -- |
| TD | % | 1.0 | -- |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.