Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | 内部方法 | 0.50-0.70 % |
| melt mass-flow rate | | ASTM D1238 | 25 g/10min |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-2 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Dart impact | | ASTM D3763 | 70.0 J |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 93.1 Mpa |
| Flexural modulus | | ASTM D790 | 2340 Mpa |
| elongation | | ASTM D638 | 130 % |
| elongation | | ASTM D638 | 6.2 % |
| tensile strength | | ASTM D638 | 64.1 Mpa |
| tensile strength | | ASTM D638 | 62.1 Mpa |
| Tensile modulus | | ASTM D638 | 2330 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Hot wire ignition (HWI) | | UL 746 | PLC 2 |
| High Voltage Arc Traceability Rate (HVTR) | | UL 746 | PLC 2 |
| High arc combustion index (HAI) | | UL 746 | PLC 1 |
| Compared to the Leakage Tracking Index (CTI) | | UL 746 | PLC 2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 138 °C |
| RTI Str | | UL 746 | 130 °C |
| RTI Imp | | UL 746 | 130 °C |
| RTI Elec | | UL 746 | 130 °C |
| Heat distortion temperature | | ASTM D648 | 127 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices