PPS DIC.PPS Z-200 DIC Corporation

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of cantilever beam gap		ASTM D256	150	J/m
Suspended wall beam without notch impact strength		ASTM D256	2000	J/m
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	0.8mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ASTM D638	2800	MPa
tensile strength		ASTM D638	60.0	MPa
elongation	Break	ASTM D638	40	%
Bending modulus		ASTM D790	2600	MPa
bending strength		ASTM D790	95.0	MPa
compressive strength		ASTM D695	70.0	MPa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa,Unannealed	ASTM D648	170	°C
Hot deformation temperature	Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	110	°C
Linear coefficient of thermal expansion	MD：-30to100°C	ASTM D696	5E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
density		ASTM D792	1.28	g/cm³
Shrinkage rate	MD	ASTM D955	1.5	%
Shrinkage rate	Shrinkage rate	TD	ASTM D955	1.7	%
Water absorption rate	23°C,24hr	ASTM D570	0.020	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz	ASTM D150	5E-03
Arc resistance		ASTM D495	60.0	sec
Dielectric strength	1.60mm	ASTM D149	16	kV/mm
Dielectric constant	1MHz	ASTM D150	3.00
Volume resistivity		ASTM D257	1E+16	ohms·cm
hardness	Test Condition	Test Method	Test Result	Test Unit
Rockwell hardness	R-Scale	ASTM D785	116

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top