Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792 | 1.50 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | ASTM D2240 | 80 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| UL flame retardant rating | | UL 94 | 5VA |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | ASTM D790 | 75.8 MPa |
| Tensile modulus | | ASTM D638 | 2240 MPa |
| tensile strength | | ASTM D638 | 51.7 MPa |
| elongation | | ASTM D638 | 24 % |
| Flexural modulus | | ASTM D790 | 2410 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Dart impact | | ASTM D4226 | 66.7 J/cm |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| High arc combustion index (HAI) | | UL 746 | |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648 | 111 °C |
| Heat distortion temperature | | ASTM D648 | 105 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 7.2E-05 cm/cm/°C |
| RTI Elec | | UL 746 | 105 °C |
| RTI Imp | | UL 746 | 105 °C |
| RTI | | UL 746 | 105 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare