PETG WS-501 JIANGYIN HUAHONG

Form：Granules

Properties:

High toughnessHigh gloss

Typical Applications:

Electrical applications

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Electrical applications
Properties:	High toughness \| High gloss

Certificates

Other

Technical Data Sheet

optical performance	Test Condition	Test Method	Test Result	Test Unit
turbidity		/	<1.0	%
Transmittance rate		ASDM D541	90	%
Refractive index		ASDM D542	1.52
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	@Yield 50mm/min(2 inch/min)	ASTM D638	496	Kgf/cm2
tensile strength	tensile strength	@Break 50mm/min(2 inch/min)	ASTM D638	281	Kgf/cm2
elongation	@Yield 50mm/min(2 inch/min)	ASTM D638	3.7	%
elongation	elongation	@Break 50mm/min(2 inch/min)	ASTM D638	136	%
bending strength	1.27mm/min(2 inch/min)	ASTM D790	620	Kgf/cm2
Bending modulus	1.27mm/min(3 inch/min)	ASTM D790	20800	Kgf/cm2
Dart impact	Low temperature	ASTM D358	791	g
Dart impact	Dart impact	Normal temperature	ASTM D358	1701	g
Izod Notched Impact Strength	@23°C	ASTM D256	98	J/m
Rockwell hardness		R-Scale	106	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	@0.45MPa	ASTM D648	77	°C
Melt flow index		ASTM D 1238:04	1.2	g/10min
melting point		/	≥196±2	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
viscosity		Ubbelodhe viscometer	0.750±0.015	dl/g
proportion		ASTM D792	1.29	kg/cm3
Water absorption rate		ASTM D570	0.15	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Surface resistivity		ASTM D257	10^16	Ohm
Volume resistivity		ASTM D257	10^15	ohm·cm
Dielectric strength	(short time,500V/sec)	ASTM D149	16	kV·mm
Dielectric constant	1 kHz	ASTM D150	2.6	–
Dielectric constant	Dielectric constant	1 MHz	ASTM D150	2.4	–
dielectric dissipation factor	1 kHz	ASTM D150	0.005	–
dielectric dissipation factor	dielectric dissipation factor	1 MHz	ASTM D150	0.023	–
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.00mm	UL 94	HB	-
	UL flame retardant rating	1.50mm	UL 94	HB	-
	UL flame retardant rating	UL flame retardant rating	3.00mm	UL 94	V-2	-

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top