PI ST-2030 DF
0
- Properties:Thermosetting PI30% graphite powder fillingthermal stability
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | 1.44 g/cm3 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | 23℃ | 3930 MPa |
| Test Condition | Test Method | Test Result | |
|---|---|---|---|
| Water absorption rate | 24hr,23℃ | 0.50 % | |
| Volume resistivity | 3E+06 ohm.cm | ||
| dielectric constant | 23℃,100Hz | 62.0 | |
| 23℃,10kHz | 36.3 | ||
| 23℃,1MHz | 24.3 | ||
| Dissipation Factor | 23℃,100Hz | 0.31 | |
| 23℃,10kHz | 0.15 | ||
| 23℃,1MHz | 0.14 | ||
| moisture content | 50℃ | 1.3 % | |
| tensile strength | 23℃ | 57 MPa | |
| tensile elongation | 断裂，23℃ | 4.9 % | |
| compressive strength | 23℃ | 155 MPa | |
| IZOD notch impact strength | 23℃ | 41.1 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Surface Resistivity | 2E+07 ohms |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top