PP EP310D BASELL THAILAND

Form：Granules | Grade：Injection grade

Properties:

Low flowEasy to processExtrusion stage

Typical Applications:

containerProfile

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	container \| Profile
Properties:	Low flow \| Easy to process \| Extrusion stage

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	0.9
melt mass-flow rate	230℃，2.16kg	ISO 1133	0.8	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-20℃，Type 1，Edgewise，Notch A	ISO 179	4.2	KJ/m
	Charpy Notched Impact Strength	0℃，Type 1，Edgewise，Notch A	ISO 179	6	KJ/m
	Charpy Notched Impact Strength	Charpy Notched Impact Strength	23℃，Type 1，Edgewise，Notch A	ISO 179	44	KJ/m
Bending modulus		ISO 527-1	1200	Mpa
elongation at yield	50mm/min	ISO 527-1	11	%
tensile strength	50mm/min，Yield	ISO 527-1	27	Mpa
Elongation at Break	50mm/min	ISO 527-1	420	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature	A50（50℃/h 10N）	ISO 306	150	°C
Hot deformation temperature	0.45MPa Unannealed	ISO 75B-1	72	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top