ABS DP M201

Compare

Technical Data Sheet

Basic performance	Test Condition	Test Method	Test Result
density		ISO 1183	1050 kg/m
Melt Mass-Flow Rate		ISO 1133	18.0 cm

Mechanical properties	Test Condition	Test Method	Test Result
Tensile Stress (Yield)		ISO 527-1,-2	2.5 %
fracture strain		ISO 527-1,-2	0.00 %
Charpy notch impact strength		ISO 179/1eA	19.0 KJ/m
Charpy notch impact strength	Charpy notch impact strength		ISO 179/1eA	10.0 KJ/m
Charpy impact strength		ISO 179/1eU	80.0 KJ/m
Charpy impact strength	Charpy impact strength		ISO 179/1eU	80.0 KJ/m
Tensile modulus		ISO 527-1,-2	2400 MPa
yield stress		ISO 527-1,-2	47.0 MPa

Electrical performance	Test Method	Test Result
Volume resistivity	IEC 60093	1E+13 ohm.m
Relative Permittivity	IEC 60250	3.10
Dielectric loss factor	IEC 60250	0.0080
electric strength	IEC 60243-1	32 KV/mm
Relative Permittivity	IEC 60250	2.90
Dielectric loss factor	IEC 60250	0.0060

Thermal performance	Test Condition	Test Method	Test Result
Heat Deflection Temperature		ISO 75-1,-2	100 ℃
Heat Deflection Temperature	Heat Deflection Temperature		ISO 75-1,-2	96.0 ℃
vicat		ISO 306	97.0 ℃
Coefficient of Linear Thermal Expansion		ISO 11359-1,-2	0.000090 cm/cm℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top