PP 1250 FPC NINGBO

Form：Granules | Grade：Injection grade

Properties:

High glossHigh rigidityGood glossinessLow warpageComplies with FDA 21 CFR High liquidity

Typical Applications:

Food packagingThin walled productsThin-wall injection molded productsCollection containerFood containers

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Food packaging \| Thin walled products \| Thin-wall injection molded products \| Collection container \| Food containers
Properties:	High gloss \| High rigidity \| Good glossiness \| Low warpage \| Complies with FDA 21 CFR \| High liquidity

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ISO 1133	25	g/10min
Shrinkage rate		FPC Method	1.3-1.7	%
density		ISO 1183	0.9	g/cm³
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ISO 527	44	Mpa
Elongation at Break		ISO 527	50	%
Rockwell hardness		ISO 2039	111	R
Bending modulus		ISO 178	1667	Mpa
Impact strength of cantilever beam gap	23℃	ISO 180	3.0	kg.cm/cm
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	HDT	ISO 75	120	°C
Vicat softening temperature		ISO 306	155	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top