AES W240 TECHNO JAPAN

Form：Granules | Grade：Injection grade

Properties:

Moderate heat resistanceMedium impact resistanceModerate heat resistanceModerate impact resistanc

Typical Applications:

Bathroom accessoriesAutomotive External PartsAutomotive External PartsBathroom accessories

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Bathroom accessories \| Automotive External Parts \| Automotive External Parts \| Bathroom accessories
Properties:	Moderate heat resistance \| Medium impact resistance \| Moderate heat resistance \| Moderate impact resistanc

Certificates

No Data...

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	220℃/10.0kg	ISO 1133	18	g/10min
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile stress	Yield	ASTM D-638	49.0	Mpa
Bending modulus		ASTM D-790	2450	Mpa
bending strength		ASTM D-790	82.4	Mpa
Impact strength of cantilever beam gap		ASTM D-256	206	J/m
Rockwell hardness		ASTM D-785	105	R scale
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPa，Unannealed	ASTM D-648	95.0	°C
Combustibility	ALL	UL 94	HB
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate		ISO 294-4	0.40-0.60	%

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top