TPE Santoprene™ 8211-55B100
239
- Properties:wear resistantAging resistanceUV resistanceWeather resistance
- Usages:WasherdiaphragmKitchen utensilsHousehold appliancesHome appliance componentsMovable hingeAdhesive resin
Compare
View PricesTechnical Data Sheet
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ISO 868 | 53 |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| UL 94 | HB |
| elastomer | Test Condition | Test Method | Test Result |
|---|---|---|---|
| elongation | ASTM D412 | 600 % | |
| ISO 37 | 600 % | ||
| compression set | ASTM D395B | 55 % | |
| ISO 815 | 55 % |
| aging | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Change rate of tensile strength in air | ASTM D573 | -28 % | |
| ASTM D573 | -61 % | ||
| ISO 188 | -28 % | ||
| ISO 188 | -61 % | ||
| Change rate of hardness (Shore) in the air | ASTM D471 | -33 | |
| ASTM D471 | 4.0 | ||
| ASTM D471 | 5.0 | ||
| Shore hardness | ISO 1817 | 2.0 | |
| ISO 1817 | 4.0 | ||
| ISO 1817 | -33 | ||
| ISO 1817 | 4.0 | ||
| ISO 1817 | 5.0 | ||
| Change rate of ultimate elongation in air | ASTM D573 | -14 % | |
| ASTM D573 | -70 % | ||
| Tensile stress change rate | ISO 188 | -14 % | |
| ISO 188 | -70 % | ||
| Change rate of hardness (Shore) in the air | ASTM D573 | -4.0 | |
| ASTM D573 | 8.0 | ||
| ISO 188 | -4.0 | ||
| ISO 188 | 8.0 | ||
| Change rate of tensile strength in air | ASTM D471 | -17 % | |
| ASTM D471 | -1.0 % | ||
| Change rate of ultimate elongation in air | ASTM D471 | -68 % | |
| ASTM D471 | -7.0 % | ||
| ASTM D471 | -12 % | ||
| Tensile stress change rate | ISO 1817 | -3.0 % | |
| ISO 1817 | -9.0 % | ||
| ISO 1817 | -68 % | ||
| ISO 1817 | -7.0 % | ||
| ISO 1817 | -12 % | ||
| Change rate of hardness (Shore) in the air | ASTM D471 | 2.0 | |
| ASTM D471 | 4.0 | ||
| Change rate of tensile strength in air | ASTM D471 | -85 % | |
| ASTM D471 | 1.0 % | ||
| ASTM D471 | 2.0 % | ||
| ISO 1817 | -17 % | ||
| ISO 1817 | -1.0 % | ||
| ISO 1817 | -85 % | ||
| ISO 1817 | 1.0 % | ||
| ISO 1817 | 2.0 % | ||
| Change rate of ultimate elongation in air | ASTM D471 | -3.0 % | |
| ASTM D471 | -9.0 % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top