HDPE BPD4045 PEMSB MALAYSIA

Form：Granules | Grade：Pipe grade

Properties:

Resistance to stress cracGood resistance to enviroWear and thermal deformat

Typical Applications:

Wire and cableInsulation materialInsulated overhead cable

Supplier(0)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Wire and cable \| Insulation material \| Insulated overhead cable
Properties:	Resistance to stress crac \| Good resistance to enviro \| Wear and thermal deformat

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Oxidation induction time (OIT)	210℃	ISO TR10837	>20	min
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190℃/2.16kg	ISO 1133: Condition 4	0.2	g/10min
melt mass-flow rate	melt mass-flow rate	190℃/5.0kg	ISO 1133: Condition 18	0.85	g/10min
density	Annealed	ISO 1872/1	941	Kg/m
density	density		ISO 1183	952	Kg/m
Carbon black content		IEC 811-4-1	2.5	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile stress		IEC 811-1-1	23	MPa
elongation	Break	IEC 811-1-1	＞600	%
Bending modulus		ISO 178	850	MPa
Shore hardness		ISO 868 (1sec)	62
thermal performance	Test Condition	Test Method	Test Result	Test Unit
thermal conductivity			BS 874(at 23℃)
Linear coefficient of thermal expansion		ASTM D-696(20-60℃)	1.5×10	℃
Brittle temperature		ASTM D-746	＜-100	℃
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dielectric constant	1 MHz	IEC 250	2.6
Dissipation factor	1 MHz	IEC 250	＜0.001

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top