PSU+PC

PSU+PC RTP 4300 S-1020 Z RTP US

Properties:
Filler glass fiber reinforced material 20% filler by weight
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Suspended wall beam without notch impact strength	3.20mm	ASTM D4812	850 J/m
Impact strength of cantilever beam gap	3.20mm	ASTM D256	110 J/m

mechanical properties	Test Condition	Test Method	Test Result
elongation	Yield	ASTM D638	3.0to5.0 %
tensile strength		ASTM D638	96.5 MPa
Tensile modulus		ASTM D638	5520 MPa
bending strength		ASTM D790	152 MPa
Bending modulus		ASTM D790	4830 MPa

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	1.8MPa,Unannealed	ASTM D648	163 °C

Physical properties	Test Condition	Test Method	Test Result
water content			0.020 %
Shrinkage rate	MD：3.20mm	ASTM D955	0.20to0.40 %
density		ASTM D792	1.35 g/cm³

Supplementary Information	Test Condition	Test Method	Test Result
Primary Additive			20 %

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top