PA12 VESTAMID® L L2123 Altuglas International of Arkema Inc.

Product Description

Certificates(0)

Datasheet

Product Description

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Charpy Notched Impact Strength	-30°C,Complete Break	ISO 179/1eA	13	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	NoBreak
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	NoBreak
Charpy Notched Impact Strength	23°C,Partial Break	ISO 179/1eA	120	kJ/m²
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	3.2mm	UL 94	HB
UL flame retardant rating	UL flame retardant rating	1.6mm	UL 94	HB
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	370	MPa
tensile strength	Yield	ISO 527-2	24.0	MPa
Tensile strain	Yield	ISO 527-2	32	%
Tensile strain	Tensile strain	Break	ISO 527-2	>50	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Melting temperature		ISO 11357-3	171	°C
Vicat softening temperature	--	ISO 306/B	120	°C
Vicat softening temperature	Vicat softening temperature	--	ISO 306/A	165	°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	45.0	°C
Hot deformation temperature	Hot deformation temperature	0.45MPa,Unannealed	ISO 75-2/B	80.0	°C
Linear coefficient of thermal expansion	MD：23to55°C	ISO 11359-2	1.8E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	Equilibrium,23°C,50%RH	ISO 62	0.60	%
Shrinkage rate	MD	ISO 294-4	0.65	%
Shrinkage rate	Shrinkage rate	TD	ISO 294-4	1.4	%
density	23°C	ISO 1183	1.03	g/cm³
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Compared to the anti leakage trace index	SolutionA3	IEC 60112	PLC 0
Compared to the anti leakage trace index	Compared to the anti leakage trace index	--	IEC 60112	PLC 0
Dissipation factor	23°C,1MHz	IEC 60250	0.11
Dissipation factor	Dissipation factor	23°C,100Hz	IEC 60250	0.20
Relative permittivity	23°C,1MHz	IEC 60250	3.60
Relative permittivity	Relative permittivity	23°C,100Hz	IEC 60250	10.0
Dielectric strength		IEC 60243-1	29	kV/mm
Volume resistivity		IEC 60093	1E+12	ohms·cm
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ISO Shortcut		ISO 1874	PA12-P.EHL.22-004
Electrolytic corrosion		IEC 60426	A1

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top