PA12 VESTAMID® L-GF30
603
- Properties:low densityHigh elasticityPhotostabilityLow temperature impact reLow friction coefficientResistance to stress cracFatigue resistance
- Usages:bearing
- Certificates:UL
Compare
View PricesTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Water absorption rate | ISO 62 | 1.1 % | |
| ISO 62 | 0.5 % | ||
| Shrinkage rate | ISO 294-4 | 0.15 % | |
| ISO 294-4 | 0.65 % | ||
| density | ISO 1183 | 1.24 g/cm |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| fracture strain | ISO 527-1/-2 | 5 % | |
| Breaking stress | ISO 527-1/-2 | 120 Mpa | |
| Tensile modulus | ISO 527-1/-2 | 6500 Mpa | |
| Charpy Notched Impact Strength | ISO 179/1eU | 100 C KJ/m | |
| ISO 179/1eU | 100 C KJ/m | ||
| ISO 179/1eA | 23 C KJ/m | ||
| ISO 179/1eA | 21 C KJ/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Relative discharge index | IEC 60112 | ＞600 | |
| dielectric constant | IEC 60250 | 4.1 | |
| IEC 60250 | 3.4 | ||
| Volume resistivity | IEC 60093 | 10 Ω.cm | |
| dielectric strength | IEC 60243-1 | 44 KV/mm | |
| Dielectric loss | IEC 60250 | 310 10 | |
| IEC 60250 | 330 10 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | HB | |
| Linear coefficient of thermal expansion | ISO 11359 | 0.6 | |
| vicat | ISO 306 | 175 ℃ | |
| melting temperature | ISO 3146 | 178 ℃ | |
| Heat distortion temperature | ISO 75 | 165 ℃ | |
| ISO 75 | 175 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
You May Like
Contact Us
Get App
Top