PA6/6T

PA6/6T Ultramid® T KR 4365 G5 BASF GERMANY

Properties:
Flame retardantThermal stabilityCorrosion resistanceResistance to electric tr
Usages:
Electrical applicationsAutomotive Applications
Compare View Prices

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch	23°C	ISO 179	75 kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179	80 kJ/m²

flammability	Test Condition	Test Method	Test Result
UL flame retardant rating	0.37 mm	UL 94	V-2
	UL flame retardant rating	0.75 mm	UL 94	V-0
		UL flame retardant rating	3.0 mm	UL 94	V-0
		UL flame retardant rating	UL flame retardant rating	1.5 mm	UL 94	5VA

mechanical properties	Test Condition	Test Method	Test Result
Tensile strain	Break, 80°C	ISO 527-2	2.5 %
	Tensile strain	Break, 23°C	ISO 527-2	3.0 %
	Tensile strain	Tensile strain	Break, -40°C	ISO 527-2	2.9 %
tensile strength	Break, 80°C	ISO 527-2	96.0 Mpa
	tensile strength	Break, 23°C	ISO 527-2	150 Mpa
	tensile strength	tensile strength	Break, -40°C	ISO 527-2	192 Mpa
Tensile modulus	23°C	ISO 527-2	8300 Mpa

thermal performance	Test Condition	Test Method	Test Result
RTI	3.0 mm	UL 746	140 °C
	RTI	1.5 mm	UL 746	130 °C
	RTI	RTI	0.75 mm	UL 746	120 °C
RTI Imp	3.0 mm	UL 746	110 °C
	RTI Imp	1.5 mm	UL 746	105 °C
	RTI Imp	RTI Imp	0.75 mm	UL 746	100 °C
RTI Elec	3.0 mm	UL 746	140 °C
	RTI Elec	1.5 mm	UL 746	140 °C
	RTI Elec	RTI Elec	0.75 mm	UL 746	140 °C
Linear coefficient of thermal expansion	Across Flow		5.5E-5 cm/cm/°C
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	Flow		2.5E-5 cm/cm/°C
Melting temperature		ISO 3146	295 °C
Hot deformation temperature	1.8 MPa, Unannealed	ISO 75-2/A	220 °C

Physical properties	Test Condition	Test Method	Test Result
Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	1.3 %
Water absorption rate	Water absorption rate	Saturation, 23°C	ISO 62	5.5 %

Electrical performance	Test Condition	Test Method	Test Result
Volume resistivity		IEC 60093	1.0E+15 ohms·cm
Dielectric constant	1 MHz	IEC 60250	4.00
Dissipation factor	1 MHz	IEC 60250	0.020
Compared to the anti leakage trace index		IEC 60112	V

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

PA6/6T Ultramid® T KR 4365 G5 BASF GERMANY

Technical Data Sheet

You May Like