PA66 A3 GF25 V0I NC1101/LA NILIT SUZHOU

Form：Granules | Grade：Injection grade

Properties:

enhanceThermal stability

Typical Applications:

Industrial applicationsAutomotive sector

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Industrial applications \| Automotive sector
Properties:	enhance \| Thermal stability

Certificates

No Data...

Technical Data Sheet

mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	23°C	ISO 527-2	130	Mpa
Elongation at Break	23°C	ISO 527-2	3.0	%
Tensile modulus	23°C	ISO 527-2	9000	Mpa
Charpy Notched Impact Strength	23°C	ISO 179/1eA	8.0	kJ/m²
Charpy Notched Impact Strength	Charpy Notched Impact Strength	-30°C	ISO 179/1eA	6.5	kJ/m²
Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	N/D	kJ/m²
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	N/D	kJ/m²
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	0.45MPaUnannealed	ISO 75-2/Bf	220	°C
Hot deformation temperature	Hot deformation temperature	1.80MPaAnnealed	ISO 75-2/Af	210	°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	MD	ISO 294-4	0.30	%
Shrinkage rate	Shrinkage rate	TD	ISO 294-4	1.00	%
Water absorption rate	(23°C,24hr)	ISO 62	1.50	%
Water absorption rate	Water absorption rate	(23°C,50RH)	ISO 62	4.50	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		IEC 60093	1E+13	Ω.cm
Surface resistivity		IEC 60093	1E+15	Ω.cm
Dielectric strength	2.00mm	IEC 60243-1	19	KV/mm
Dissipation factor	相对漏电起痕指数	IEC 60112	600	V
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL -94	V-0	0.40mm
	UL flame retardant rating		UL -94	V-0	0.75mm
		UL flame retardant rating		UL -94	V-0	1.50mm
		UL flame retardant rating	UL flame retardant rating		UL -94	V-0	3.00mm
Extreme Oxygen Index		ISO 4589-2	30	%
Ignition temperature of heating wire	0.40mm	IEC 60695-2-12	750	°C
	Ignition temperature of heating wire	0.75mm	IEC 60695-2-12	775	°C
		Ignition temperature of heating wire	1.50mm	IEC 60695-2-12	800	°C
		Ignition temperature of heating wire	Ignition temperature of heating wire	3.00mm	IEC 60695-2-12	800	°C
Relative temperature of heating wire	0.40mm	IEC 60695-2-13	960	°C
	Relative temperature of heating wire	0.75mm	IEC 60695-2-13	960	°C
		Relative temperature of heating wire	1.50mm	IEC 60695-2-13	960	°C
		Relative temperature of heating wire	Relative temperature of heating wire	3.00mm	IEC 60695-2-13	960	°C

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top