PPS 1140A6 HF2000 TAIWAN POLYPLASTICS

Form：Granules | Grade：Injection grade

Properties:

Glass fiber reinforcedHigh rigidityhigh strengthHigh impact resistanceFlame retardant

Typical Applications:

small home appliancesFitness equipmentElectrical fieldElectronic fieldAutomotive sectorsporting goods

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	small home appliances \| Fitness equipment \| Electrical field \| Electronic field \| Automotive sector \| sporting goods
Properties:	Glass fiber reinforced \| High rigidity \| high strength \| High impact resistance \| Flame retardant

Certificates

No Data...

Technical Data Sheet

Other performance	Test Condition	Test Method	Test Result	Test Unit
Melt viscosity	310℃、1000sec	ISO 11443	260	Pa.s
Water absorption rate		ISO 62	0.01	%
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	V-0
Basic Performance	Test Condition	Test Method	Test Result	Test Unit
density		ISO 1183	1.66
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
bending strength		ISO 178	260	Mpa
Bending modulus		ISO 178	13200	Mpa
Tensile strain	Break	ISO 527-2	1.7	%
tensile strength		ISO 527-2	185	Mpa
Charpy Notched Impact Strength		ISO 179/leA	10	KJ/m
Bending modulus		ISO 178	13800	Mpa
bending strength		ISO 178	280	Mpa
Fracture strain		ISO 527-1	1.9	%
tensile strength		ISO 527-1	210	Mpa
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Linear coefficient of thermal expansion	MD	Internal Method	1E-05	cm/cm/°C
Hot deformation temperature	1.8MPa,Unannealed	ISO 75-2/A	265	°C
UL flame retardant rating		UL 94	V-0
Hot deformation temperature	1.8MPa	ISO 75-1	270	°C
Linear coefficient of thermal expansion	TD	Internal Method	4E-05	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Water absorption rate	23°C,24hr	ISO 62	0.040	%
Melt viscosity	310°C,1000sec^-1	ISO 11443	260000	mPa·s
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Dissipation factor	1MHz	IEC 60250	2E-03
Dissipation factor	Dissipation factor	1kHz	IEC 60250	1E-03
Relative permittivity	1MHz	IEC 60250	4.50
Relative permittivity	Relative permittivity	1kHz	IEC 60250	4.50
Dielectric strength	3.00mm	IEC 60243-1	16	KV/mm
Volume resistivity		IEC 60093	5E+15	ohms·cm
Supplementary Information	Test Condition	Test Method	Test Result	Test Unit
ColourNumber			HD9100.HD9001

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top