Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ASTM D955 | 0.15 % |
| Shrinkage rate | | ASTM D955 | 0.45 % |
| Water absorption rate | | ASTM D570 | 0.020 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTM D785 | 121 |
| other | Test Condition | Test Method | Test Result |
|---|
| characteristic | | | 玻璃纤维和无机物填充增强等级.高硬度.尺寸稳定性.可以代替金属材料 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTM D638/ISO 527 | 22*10^4 kg/cm²(MPa)[Lb/in²] |
| tensile strength | | ASTM D638/ISO 527 | 1730 kg/cm²(MPa)[Lb/in²] |
| Flexural modulus | | ASTM D790/ISO 178 | 19*10^4 kg/cm²(MPa)[Lb/in²] |
| bending strength | | ASTM D790/ISO 178 | 2390 kg/cm²(MPa)[Lb/in²] |
| Tensile modulus | | ASTM D638 | 21600 Mpa |
| tensile strength | | ASTM D638 | 170 Mpa |
| elongation | | ASTM D638 | 1.4 % |
| Flexural modulus | | ASTM D790 | 18600 Mpa |
| bending strength | | ASTM D790 | 234 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| arc resistance | | ISO 14782 | 137 |
| arc resistance | | ASTM D495 | 137 sec |
| Compared to the Leakage Tracking Index (CTI) | | IEC 60112 | PLC 3 |
| Volume resistivity | | ASTM D257 | 1E+15 ohms·cm |
| dielectric strength | | ASTM D149 | 11 KV/mm |
| dielectric constant | | ASTM D150 | 5.10 |
| dielectric constant | | ASTM D150 | 4.50 |
| Dissipation Factor | | ASTM D150 | 0.055 |
| Dissipation Factor | | ASTM D150 | 8.5E-03 |
| Physical properties | Test Condition | Test Method | Test Result |
|---|
| density | | ASTM D792/ISO 1183 | 1.96 |
| Water absorption rate | | ASTM D570/ISO 62 | 0.02 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| Heat distortion temperature | | ASTM D648/ISO 75 | >260 ℃（℉） |
| Heat distortion temperature | | ASTM D648 | 260 °C |
| Linear coefficient of thermal expansion | | ASTM D696 | 1.2E-05 cm/cm/°C |
| Linear coefficient of thermal expansion | | ASTM D696 | 4.8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices