Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | ISO294-4 | 0.70 % |
| Shrinkage rate | | ISO294-4 | 0.20 % |
| HumidityAbsorption-62%RH | | ISO1110 | 1.9 % |
| flammability | Test Condition | Test Method | Test Result |
|---|
| FlameRating | | UL94 | HB |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| ReinforcementContent | | ISO1172 | 30 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ISO527-2/1 | 23000 Mpa |
| Tensile stress | | ISO527-2/5 | 220 Mpa |
| Tensile strain | | ISO527-2/5 | 2.0 % |
| Bending modulus 2 | | ISO178 | 22000 Mpa |
| Bending stress 2 | | ISO178 | 370 Mpa |
| Fracture bending strain 3 | | ISO178 | 2.5 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | ISO179/1eU | 55 kJ/m² |
| Impact strength of simply supported beam without notch | | ISO179/1eU | 55 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Surface Resistivity | | IEC60093 | 1E+04 ohms |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ISO75-2/A | 254 °C |
| Melting temperature 5 | | DINEN11357-1 | 262 °C |
| | ISO11359-2 | 6E-06 cm/cm/°C |
| | ISO11359-2 | 7.2E-05 cm/cm/°C |
| thermal conductivity | | DIN52612 | 0.42 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare
View Prices