HIPS MA5688
66
- Properties:wear resistantHigh glossThe product has good proc
CompareTechnical Data Sheet
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 4.2 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Yield tensile strength (blow molding characteristics) | ASTM D-638 | 3300 psi | |
| Fracture elongation (blow molding characteristics) | ASTM D-638 | 37 % | |
| Fracture tensile strength (injection characteristics) | ASTM D-638 | 3650 psi | |
| IZOD notch impact strength | ASTM D-256 | 2.00 ft-lb/in | |
| Fracture elongation (injection characteristics) | ASTM D-638 | 60 % | |
| IZOD notch impact strength | ASTM D-256 | 1.85 ft-lb/in | |
| Tensile strength at break (blow molding characteristics) | ASTM D-638 | 2500 % | |
| Yield tensile strength (injection characteristics) | ASTM D-638 | 3900 psi |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | ASTM D-1525 | 101 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top