TPE OM 1262NX-1 SUZHOU GLS

Form：Granules | Grade：Injection grade

Properties:

Low glossProcessabilityGood forming performanceGood colorability

Typical Applications:

Wrapping moldingThin walled componentsElectrical fieldElectronic fieldpowerTool productsSoft handleBusiness equipmentConsumer goods sectorPower/Other ToolsSoft handleElectrical/Electronic ApplicationsConsumer product application fieldBusiness equipmentWrapping moldingThin walled components

Supplier(0)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Wrapping molding \| Thin walled components \| Electrical field \| Electronic field \| power \| Tool products \| Soft handle \| Business equipment \| Consumer goods sector \| Power/Other Tools \| Soft handle \| Electrical/Electronic Applications \| Consumer product application field \| Business equipment \| Wrapping molding \| Thin walled components
Properties:	Low gloss \| Processability \| Good forming performance \| Good colorability

Certificates

Technical Data Sheet

Filling analysis	Test Condition	Test Method	Test Result	Test Unit
Apparent viscosity	200°C,11200sec^-1	ASTM D3835	20.0	Pa·s
flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	HB
elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	100%Strain,23°C	ASTM D412	2.55	Mpa
	tensile strength	300%Strain,23°C	ASTM D412	3.34	Mpa
	tensile strength	tensile strength	Break,23°C	ASTM D412	7.64	Mpa
elongation	Break,23°C	ASTM D412	710	%
tear strength		ASTM D624	40.3	kN/m
Permanent compression deformation	23°C,22hr	ASTM D395B	35	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ASTM D1238	11	g/10min
melt mass-flow rate	melt mass-flow rate	200°C/5.0kg	ASTM D1238	64	g/10min
Shrinkage rate	MD	ASTM D955	0.90-1.5	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreA,10Sec	ASTM D2240	65

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top