TPEE P-40B TOYOBO JAPAN

Form：Granules | Grade：Injection grade

Typical Applications:

currency

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:

currency

Certificates

No Data...

Technical Data Sheet

flammability	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating		UL 94	HB
elastomer	Test Condition	Test Method	Test Result	Test Unit
tensile strength	50%Strain	ASTM D412	3.40	Mpa
tear strength		ASTM D624	76.0	kN/m
Permanent compression deformation		ASTM D395	49	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength	Yield	ASTM D638	14.0	Mpa
elongation	Break	ASTM D638	820	%
Bending modulus		ASTM D790	23.0	Mpa
Compressive modulus		ASTM D695	2.40	Mpa
Taber abraser	1000Cycles	ASTM D1044	20.0	mg
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Brittle temperature		ASTM D746	-65.0	°C
Vicat softening temperature		ASTM D1525	89.0	°C
Melting temperature		DSC	180	°C
Linear coefficient of thermal expansion	MD	ASTM D696	2E-04	cm/cm/°C
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	190°C/2.16kg	ASTM D1238	10	g/10min
Shrinkage rate	MD：2.00mm	ASTM D955	0.40	%
Water absorption rate	Equilibrium,23°C,65%RH	ASTM D570	0.56	%
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Volume resistivity		ASTM D257	1E+12	ohms·cm
Dielectric strength		ASTM D149	20	KV/mm
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	ShoreD	ASTM D2240	31

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top