Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD792 | 0.950 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 75 |
| | ASTMD2240 | 73 |
| Supplementary Information | Test Condition | Test Method | Test Result |
|---|
| OzoneResistance | | ASTMD1149 | Excellent |
| elastomer | Test Condition | Test Method | Test Result |
|---|
| tear strength | | ASTMD624 | 40.0 kN/m |
| compression set | | ASTMD395 | 30 % |
| compression set | | ASTMD395 | 52 % |
| Tensile stress | | ASTMD412 | 5.00 MPa |
| tensile strength | | ASTMD412 | 6.00 MPa |
| elongation | | ASTMD412 | 520 % |
| aging | Test Condition | Test Method | Test Result |
|---|
| Change rate of ultimate elongation in air | | ASTMD573 | -6.0 % |
| The rate of change in hardness of an air hardness tester | | ASTMD573 | 4.0 |
| Change rate of tensile strength in air | | ASTMD573 | -11 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| brittle temperature | | ASTMD746 | -70.0 °C |
| melting temperature | | | 159 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare