
TPV 251-70W232 CELANESE USA
184
Form:Granules | Grade:Flame retardant grade
Properties:
Flame retardantdimensional stability Low compression deformatiFlexibility at low temperRecyclable materialsElectrical performanceAging resistanceheat-resistingGood colorabilityOzone resistanceChemical resistanceFatigue resistance
Typical Applications:
Electric wireCableAutomotive sectorCable sheathFlexible cable sheathCable sheathWire and cable applicationsApplication in the automotive fieldFlexible cable sheath
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Electric wire | Cable | Automotive sector | Cable sheath | Flexible cable sheath | Cable sheath | Wire and cable applications | Application in the automotive field | Flexible cable sheath |
| Properties: | Flame retardant | dimensional stability | Low compression deformati | Flexibility at low temper | Recyclable materials | Electrical performance | Aging resistance | heat-resisting | Good colorability | Ozone resistance | Chemical resistance | Fatigue resistance |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 1.0mm | UL 94 | V-2 | |
| 1.5mm | UL 94 | V-0 | ||
| 3.0mm | UL 94 | V-0 | ||
| Extreme Oxygen Index | ASTM D2863 | 26 | % | |
| ISO 4589-2 | 26 | % | ||
| elastomer | Test Condition | Test Method | Test Result | Test Unit |
| Tensile stress | 100%Strain,23°C,横向Flow | ASTM D412 | 2.70 | Mpa |
| 100%Strain,23°C,横向Flow | ISO 37 | 2.70 | Mpa | |
| tensile strength | Break,23°C,横向Flow | ASTM D412 | 6.30 | Mpa |
| Break,23°C | ISO 37 | 6.30 | Mpa | |
| elongation | Break,23°C,Across Flow | ASTM D412 | 550 | % |
| Break,23°C,Across Flow | ISO 37 | 550 | % | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| RTI Elec | UL 746 | 90.0 | °C | |
| RTI Str | 1.5mm | UL 746 | 85.0 | °C |
| 3.0mm | UL 746 | 90.0 | °C | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Dielectric constant | 23°C,1.98mm | ASTM D150 | 2.50 | |
| 23°C,1.98mm | IEC 60250 | 2.50 | ||
| Compared to the anti leakage trace index | CTI | UL 746 | PLC 0 | |
| High arc combustion index | HAI | UL 746 | PLC 0 | |
| High voltage arc tracing rate | HVTR | UL 746 | PLC 2 | |
| Hot wire ignition | HWI | UL 746 | PLC 3 | |
| Dielectric strength | 23°C,2.00mm | ASTM D149 | 31 | KV/mm |
| hardness | Test Condition | Test Method | Test Result | Test Unit |
| Shore hardness | ShoreA,15Sec,23°C | ISO 868 | 75 | |
| aging | Test Condition | Test Method | Test Result | Test Unit |
| Change rate of tensile strength in air | 150°C,168hr | ASTM D573 | -21 | % |
| 150°C,168hr | ISO 188 | -21 | % | |
| Change rate of ultimate elongation in air | 150°C,168hr | ASTM D573 | -25 | % |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.