PC/PBT V3900WX-BK1066 SABIC INNOVATIVE NANSHA

Form：Granules

Properties:

Dimensional stabilityNon enhancedHigh impactHigh toughnessLow warpageGood weather resistance

Typical Applications:

Automotive sectorElectric vehicle charging stationElectronic and electrical enclosureArchitectural ApplicationsLighting applicationsIndustrial ElectricalCommunication equipmentWire and cableOutdoor ElectricalPhotovoltaic power generation

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Automotive sector \| Electric vehicle charging station \| Electronic and electrical enclosure \| Architectural Applications \| Lighting applications \| Industrial Electrical \| Communication equipment \| Wire and cable \| Outdoor Electrical \| Photovoltaic power generation
Properties:	Dimensional stability \| Non enhanced \| High impact \| High toughness \| Low warpage \| Good weather resistance

Certificates

No Data...

Technical Data Sheet

thermal performance	Test Condition	Test Method	Test Result	Test Unit
Hot deformation temperature	Unannealed1.8MPa 3.2mm	ASTM D648	75	℃
	Hot deformation temperature	Unannealed0.45MPa 6.4mm	ASTM D648	119	℃
		Hot deformation temperature	Unannealed1.8MPa 6.4mm	ASTM D648	96	℃
		Hot deformation temperature	Hot deformation temperature	1.8MPa 4.0mm	IS075	77	℃
Vicat softening temperature	50C/hr 50N	ASTM D1525	105	℃
	Vicat softening temperature	50C/hr 50N	ISO 306	121	℃
	Vicat softening temperature	Vicat softening temperature	120°C/hr 50N	ISO 306	123	℃
Linear coefficient of thermal expansion	Flow-40.0~40℃	ASTM E831	8.84E-5	cm/cm/℃
	Linear coefficient of thermal expansion	垂直-40.0~40℃	ASTM E831	8.97E-5	cm/cm/"C
		Linear coefficient of thermal expansion	Flow-40.0~40℃	ISO 11359	8.84E-5	cm/cm/℃
		Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	垂直-40.0~40℃	ISO 11359	8.97E-5	cm/cm/℃
Ball indentation test		IEC 60695	75	C
Ball indentation test	Ball indentation test		IEC 60695	125	℃
Physical properties	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate	265°℃ 2.16kg	ISO 1133	11	cm²/10min
Outdoor applicability	24 hours	UL 746C	f1
flame retardant performance	Test Condition	Test Method	Test Result	Test Unit
UL flame retardant rating	1.5mm	UL 94	V-0
UL flame retardant rating	UL flame retardant rating	3.0mm	UL 94	V-05VA
Ignition temperature of heating wire	1.0mm	IEC 60695	825	℃
Ignition temperature of heating wire	Ignition temperature of heating wire	3.0mm	IEC 60695	725	℃
Relative temperature of heating wire	1mm	IEC 60695	960	℃

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top