Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | | 0.60to1.0 % |
| melt mass-flow rate | | | 0.20to2.0 g/10min |
| density | | | 0.800 g/cm³ |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Shore hardness | | | 20 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Impact strength of simply supported beam without notch | | | 无断裂 |
| Charpy Notched Impact Strength | | | 无断裂 |
| Impact strength of simply supported beam without notch | | | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| bending strength | | | 5.00 MPa |
| Flexural modulus | | | 60.0 MPa |
| Tensile strain | Break | | 300 % |
| tensile strength | Yield | | 4.00 MPa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | | 1E+15 ohms·cm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| melting temperature | | | 160 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare