HIPS EC2100-AMST
0
- Properties:Good toughnesshigh impact resistanceand impact modification
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D-792 | 1.03 g/cm | |
| Mold shrinkage rate | ASTM D-955 | 0.40-0.80 % |
| Basic performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | ASTM D-1238 | 1.9 g/10min |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ASTM D-638 | 1170 MPa | |
| tensile yield strength | ASTM D-638 | 11.7 MPa | |
| tensile elongation at break | ASTM D-638 | 130 % | |
| Flexural modulus | ASTM D-790 | 1240 MPa | |
| bending strength | ASTM D-790 | 22.8 MPa | |
| IZOD notch impact strength | ASTM D-256 | 294 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| ASTM D-648 | 80.0 ℃ | ||
| vicat | ASTM D-1525 | 96.7 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top