HDPE UNITHENE® LH606
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| density | ASTM D792 | 0.962 g/cm³ | |
| melt mass-flow rate | ASTM D1238 | 6.0 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shore hardness | ASTM D2240 | 69 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | Yield | ASTM D638 | 30.4 MPa |
| Break | ASTM D638 | 21.6 MPa | |
| elongation | Break | ASTM D638 | 600 % |
| Flexural modulus | ASTM D747 | 971 MPa | |
| Tensile modulus | Compression Molded | ASTM D638 | 971 MPa |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | ASTM D256 | 69 J/m |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| brittle temperature | ASTM D746 | <-76.0 °C | |
| vicat | ASTM D1525 | 127 °C | |
| melting temperature | ASTM D3418 | 135 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top