ABS Iupilon® MB8900
0
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Shrinkage rate | 0.20 % | ||
| Melt volume flow rate | ISO1133 | 23.0 cm³/10min | |
| Shrinkage rate | 0.25到0.45 % | ||
| 0.25到0.45 % | |||
| density | ISO1183 | 1.20 g/cm³ | |
| melt mass-flow rate | ISO1133 | 25 g/10min |
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL94 | V-1 | |
| UL94 | 5VB |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO179 | 30 kJ/m² | |
| Impact strength of simply supported beam without notch | ISO179 | 无断裂 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | ISO527-2 | 2800 MPa | |
| Tensile stress | Yield | ISO527-2 | 55.0 MPa |
| Tensile strain | Yield | ISO527-2 | 3.5 % |
| Nominal tensile fracture strain | ISO527-2 | 44 % | |
| Flexural modulus | ISO178 | 2600 MPa | |
| Bending stress | ISO178 | 88.0 MPa |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top