
PA66 HF3064G30 B TORAY PLASTICS CHENGDU
45
Form:Granules | Grade:Halogen-free flame retardant grade
Properties:
Flame retardant
Typical Applications:
Automotive ApplicationsElectrical componentsElectronic and electrical enclosureElectronic and Electrical ApplicationsElectrical appliancesIndustrial ElectricalOA deviceLaptop case
Product Description
Certificates(0)
Datasheet
Product Description
| Typical Applications: | Automotive Applications | Electrical components | Electronic and electrical enclosure | Electronic and Electrical Applications | Electrical appliances | Industrial Electrical | OA device | Laptop case |
| Properties: | Flame retardant |
Certificates
No Data...
Technical Data Sheet
| flammability | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| UL flame retardant rating | 0.79 mm | UL 94 | V-0 | |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| tensile strength | 23°C | ISO 527-2 | 154 | Mpa |
| Tensile strain | Break, 23°C | ISO 527-2 | 2.5 | % |
| Bending modulus | 23°C | ISO 178 | 10400 | Mpa |
| bending strength | 23°C | ISO 178 | 234 | Mpa |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| Hot deformation temperature | 0.45 MPa, Unannealed | ISO 75-2/B | 251 | °C |
| Melting temperature | DSC | 265 | °C | |
| Linear coefficient of thermal expansion | Flow | ISO 11359-2 | 2.0E-5 | cm/cm/°C |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 横向Flow : 3.00 mm | Internal Method | 0.90 - 1.1 | % |
| Flow : 3.00 mm | Internal Method | 0.10 - 0.30 | % | |
| Water absorption rate | 24 hr, 23°C | ISO 62 | 0.70 | % |
| Saturation, 23°C | ISO 62 | 4.0 | % | |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | IEC 60093 | 1.0E+13 | ohms·cm |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.