Thermoset Premi-Glas® 3405 USA Premix
0
CompareTechnical Data Sheet
| flammability | Test Condition | Test Method | Test Result |
|---|---|---|---|
| UL flame retardant rating | UL 94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Tensile modulus | Compression Molded | ASTM D638 | 11700 MPa |
| tensile strength | Compression Molded | ASTM D638 | 82.7 MPa |
| Flexural modulus | Compression Molded | ASTM D790 | 8960 MPa |
| bending strength | Compression Molded | ASTM D790 | 190 MPa |
| Poisson's ratio | 0.30 |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Impact strength of cantilever beam gap | Compression Molded | ASTM D256 | 1000 J/m |
| Suspended wall beam without notch impact strength | Compression Molded | ASTM D4812 | 1400 J/m |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| arc resistance | ASTM D495 | >180 sec | |
| Compared to the Leakage Tracking Index (CTI) | ASTM D2303 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| Linear coefficient of thermal expansion | 2.5E-05 cm/cm/°C | ||
| 3.5E-05 cm/cm/°C | |||
| thermal conductivity | 0.30 W/m/K | ||
| RTI Elec | UL 746 | 130 °C | |
| RTI Imp | UL 746 | 130 °C | |
| RTI Str | UL 746 | 130 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top