Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| density | | ASTMD1505 | 0.923 g/cm³ |
| melt mass-flow rate | | ASTMD1238 | 2.0 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| | ASTMD2240 | 93 |
| optical performance | Test Condition | Test Method | Test Result |
|---|
| gloss | | ASTMD2457 | 109 |
| Haze ratio | | ASTMD1003 | 7.0 % |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 11.0 MPa |
| tensile strength | | ASTMD638 | 12.5 MPa |
| elongation | | ASTMD638 | 550 % |
| | ASTMD1894 | 0.65 |
| film | Test Condition | Test Method | Test Result |
|---|
| Secant modulus | | ASTMD882 | 95.0 MPa |
| Secant modulus | | ASTMD882 | 100 MPa |
| tensile strength | | ASTMD882 | 21.0 MPa |
| tensile strength | | ASTMD882 | 19.0 MPa |
| elongation | | ASTMD882 | 370 % |
| Elmondov tear strength | | ASTMD1922 | 420 g |
| Elmondov tear strength | | ASTMD1922 | 280 g |
| Falling hammer impact | | ASTMD1709A | 140 g |
| elongation | | ASTMD882 | 650 % |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| vicat | | ASTMD1525 | 94.0 °C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare