PA11/TPE 55R53 SP 01 ARKEMA USA

Form：Granules | Grade：Injection grade

Properties:

UV resistanceThermal stability

Typical Applications:

Electric wireProfile

Supplier(1)

Product Description

Certificates(0)

Datasheet

Product Description

Typical Applications:	Electric wire \| Profile
Properties:	UV resistance \| Thermal stability

Certificates

No Data...

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result	Test Unit
Impact strength of simply supported beam without notch	-30°C	ISO 179/1eU	无断裂
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	ISO 179/1eU	无断裂
squeeze out	Test Condition	Test Method	Test Result	Test Unit
drying temperature			65 to 75	°C
drying time			4.0 to 8.0	hr
Melt Temperature			200 to 270	°C
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
Tensile modulus		ISO 527-2	--	Mpa
tensile strength	Break	ISO 527-2	45.0	Mpa
tensile strength	tensile strength	50% Strain	ISO 527-2	--	Mpa
Tensile strain	Break	ISO 527-2	> 300	%
injection	Test Condition	Test Method	Test Result	Test Unit
drying temperature			65 to 75	°C
drying time			4.0 to 8.0	hr
Processing (melt) temperature			210 to 230	°C
Mold temperature			25 to 60	°C
thermal performance	Test Condition	Test Method	Test Result	Test Unit
Vicat softening temperature		ISO 306/B50	156	°C
Melting temperature		ISO 11357-3	167	°C
Melting temperature	Melting temperature	Renewable Carbon Conent	CSA LISTED	62 to 66	%
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Shrinkage rate	横向Flow	ISO 294-4	1.0	%
Shrinkage rate	Shrinkage rate	Flow	ISO 294-4	1.0	%
Water absorption rate	Saturation, 23°C	ISO 62	1.5	%
Water absorption rate	Water absorption rate	Equilibrium, 23°C, 50% RH	ISO 62	0.70	%
hardness	Test Condition	Test Method	Test Result	Test Unit
Shore hardness	Shore D, 15 Sec	ISO 7619-1	51

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top