Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| melt mass-flow rate | | ASTMD1238 | 15 g/10min |
| Shrinkage rate | | ASTMD955 | 0.50到0.70 % |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 118 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating 5 | | UL94 | HB |
| UL flame retardant rating 5 | | UL94 | HB |
| Extreme Oxygen Index 5 | | ASTMD2863 | 26 % |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Suspended wall beam without notch impact strength | | ASTMD256 | 无断裂 |
| Dart impact equipped with measuring instruments 3 | | ASTMD3763 | 87.0 J |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| Tensile modulus | | ASTMD638 | 2340 Mpa |
| tensile strength | | ASTMD638 | 60.0 Mpa |
| tensile strength | | ASTMD638 | 71.0 Mpa |
| elongation | | ASTMD638 | 150 % |
| Flexural modulus | | ASTMD790 | 2410 Mpa |
| bending strength | | ASTMD790 | 96.5 Mpa |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| dielectric constant | | ASTMD150 | 3.00 |
| dielectric constant | | ASTMD150 | 3.00 |
| Dissipation Factor | | ASTMD150 | 1E-03 |
| Dissipation Factor | | ASTMD150 | 2E-03 |
| Volume resistivity | | ASTMD257 | 2E+17 ohms·cm |
| dielectric strength | | ASTMD149 | 17 KV/mm |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| | ASTMD648 | 143 °C |
| | ASTMD648 | 127 °C |
| | ASTMD648 | 140 °C |
| vicat | | ASTMD15254 | 148 °C |
| | ASTMD696 | 6.8E-05 cm/cm/°C |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare