PP H9018
0
- Properties:Thin wall injection molding
CompareTechnical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|---|---|---|
| melt mass-flow rate | GB/T 3682-2000 | 54 g/10min |
| Other performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| cleanliness | Q/TBB.0001-2011附录B | ≤5 个/kg | |
| isotactic index | GB/T 2412-2008 | ≥97.1 % | |
| Granular ash content | GB/T 9345.1-2008 | ≤0.04 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|---|---|---|
| tensile strength | GB/T 1040-92 | ≥38.6 MPa | |
| Flexural modulus | GB/T 9341-2008 | ≥1901 MPa | |
| Rockwell hardness | GB/T 3398.2-2008 | ≥103 R | |
| Impact strength of cantilever beam gap | GB/T 1843-2008 | ≥2 Kj/m2 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|---|---|---|
| vicat | GB/T 1633-2000 | ≥154 ℃ |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Contact Us
Get App
Top