PA6

PA6 Grilon® BG-25 HM EMS-GRIVORY

Properties:
Filler glass fiber reinforced material 25% filler by weight
Usages:
Automotive internal parts automotive applications electrical and electronic applications home appliance components
Compare

Technical Data Sheet

impact performance	Test Condition	Test Method	Test Result
Impact strength of simply supported beam without notch	-30°C	kJ/m²	35 35
Impact strength of simply supported beam without notch	Impact strength of simply supported beam without notch	23°C	kJ/m²	40 45
Charpy Notched Impact Strength	-30°C	kJ/m²	9.0 9.0
Charpy Notched Impact Strength	Charpy Notched Impact Strength	23°C	kJ/m²	10 12

flammability	Test Condition	Test Method	Test Result
Flammability level	0.8mm		HB --

mechanical properties	Test Condition	Test Method	Test Result
Tensile modulus		MPa	6900 5200
tensile strength	Break	MPa	110 90.0
Tensile strain	Break	%	3.0 5.0

thermal performance	Test Condition	Test Method	Test Result
Hot deformation temperature	1.8MPa,Unannealed	°C	155 --
Hot deformation temperature	Hot deformation temperature	8.0MPa,Unannealed	°C	70.0 --
Continuous use temperature	--2	°C	80.0to110 --
Continuous use temperature	Continuous use temperature	--3	°C	160 --
Melting temperature		°C	222 --
Linear coefficient of thermal expansion	MD	cm/cm/°C	2.5E-05 --
Linear coefficient of thermal expansion	Linear coefficient of thermal expansion	TD	cm/cm/°C	1.5E-04 --

Physical properties	Test Condition	Test Method	Test Result
Shrinkage rate	TD	%	0.40 --
Shrinkage rate	Shrinkage rate	MD	%	0.10 --
Water absorption rate	Saturation,23°C	%	5.0 --
Water absorption rate	Water absorption rate	Equilibrium,23°C,50%RH	%	1.5 --
density		g/cm³	1.22 --

Electrical performance	Test Method	Test Result
Surface resistivity	ohms	-- 1E+12
Volume resistivity	ohms·cm	1E+14 1E+11
Dielectric strength	kV/mm	40 34
Compared to the anti leakage trace index	V	--

hardness	Test Condition	Test Method	Test Result
Ball Pressure Test		MPa	130 90.0

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top