PPS R-4-230NA CPCHEM SINGAPHORE

Form：Granules | Grade：Extrusion grade

Properties:

High temperature resistanhigh strengthHigh mobility

Typical Applications:

Automotive Applicationselectrical equipment

Supplier(1)

Product Description

Certificates(1)

Datasheet

Product Description

Typical Applications:	Automotive Applications \| electrical equipment
Properties:	High temperature resistan \| high strength \| High mobility

Certificates

Technical Data Sheet

Basic Performance	Test Condition	Test Method	Test Result	Test Unit
melt mass-flow rate		ASTM D-792	1.65	g/10min
Water absorption rate		ASTM D-570	0.05	%
mechanical properties	Test Condition	Test Method	Test Result	Test Unit
tensile strength		ASTM D-638	25.0	Ksi
bending strength		ASTM D-790	32.0	Ksi
Tensile modulus		ASTM D-790	2.1	Msi
compressive strength		ASTM D-695	35.0	Ksi
Impact strength of cantilever beam gap	1/8inch有缺	ASTM D-256	1.6	ft.lbf/in
Impact strength of cantilever beam gap	Impact strength of cantilever beam gap	1/8inch无缺	ASTM D-256	8.0	ft.lbf/in
elongation		ASTM D-638	1.3	%
thermal performance	Test Condition	Test Method	Test Result	Test Unit
UL Temperature Index		UL	200/220	°C
Hot deformation temperature	HDT	ASTM D-648	>500	°F
Combustibility		UL 94	V-0/5VA
Physical properties	Test Condition	Test Method	Test Result	Test Unit
Color			Natural
Electrical performance	Test Condition	Test Method	Test Result	Test Unit
Donation consumption factors	1KHz	ASTM D-150	0.002
insulation resistance	90℃,48hrs		1×10	Ω
Dissipation factor	1MHz	ASTM D-150	0.003
Dielectric constant	1KHz	ASTM D-150	4.0
Volume resistivity		ASTM D-257	2×10	Ω.cm
CTI Trace		UL 746A	175	V
Dielectric strength		ASTM D-149	500	v/mil
Dielectric constant	1MHz	ASTM D-149	3.9
Arc resistance		ASTM D-495	125	sec
High voltage arc tracing rate		UL 746A		in/min

IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.

Get App

Top