Technical Data Sheet
| physical property | Test Condition | Test Method | Test Result |
|---|
| Shrinkage rate | | 内部方法 | 0.10to0.20 % |
| Water absorption rate | | ASTMD570 | 0.12 % |
| Water absorption rate | | ASTMD570 | 0.23 % |
| Specific volume | | ASTMD792 | 0.658 cm³/g |
| melt mass-flow rate | | ASTMD1238 | 13 g/10min |
| hardness | Test Condition | Test Method | Test Result |
|---|
| Rockwell hardness | | ASTMD785 | 93 |
| Rockwell hardness | | ASTMD785 | 119 |
| flammability | Test Condition | Test Method | Test Result |
|---|
| UL flame retardant rating | | UL94 | V-1 |
| UL flame retardant rating | | UL94 | V-0 |
| Mechanical properties | Test Condition | Test Method | Test Result |
|---|
| tensile strength | | ASTMD638 | 125 Mpa |
| elongation | | ASTMD638 | 3.0 % |
| Flexural modulus | | ASTMD790 | 9650 Mpa |
| bending strength | | ASTMD790 | 186 Mpa |
| | ASTMD1044 | 32.0 mg |
| Impact resistance | Test Condition | Test Method | Test Result |
|---|
| Falling hammer impact | | ASTMD3029 | 6.78 J |
| Tensile impact strength 4 | | ASTMD1822 | 67.2 kJ/m² |
| Electrical performance | Test Condition | Test Method | Test Result |
|---|
| Volume resistivity | | ASTMD257 | >1.0E+17 ohms·cm |
| dielectric strength | | ASTMD149 | 18 KV/mm |
| dielectric constant | | ASTMD150 | 3.53 |
| dielectric constant | | ASTMD150 | 3.53 |
| dielectric constant | | ASTMD150 | 3.48 |
| Dissipation Factor | | ASTMD150 | 1.3E-03 |
| Dissipation Factor | | ASTMD150 | 1.3E-03 |
| Dissipation Factor | | ASTMD150 | 6.7E-03 |
| Arc resistance 6 | | ASTMD495 | PLC7 |
| Compared to the Leakage Tracking Index (CTI) | | UL746 | PLC 4 |
| High arc combustion index (HAI) | | UL746 | PLC 4 |
| High Voltage Arc Traceability Rate (HVTR) | | UL746 | PLC 3 |
| Hot wire ignition (HWI) | | UL746 | PLC 0 |
| Thermal performance | Test Condition | Test Method | Test Result |
|---|
| RTI Elec | | UL746 | 130 °C |
| RTI Imp | | UL746 | 130 °C |
| RTI Str | | UL746 | 130 °C |
| | ASTMD648 | 154 °C |
| | ASTMD648 | 146 °C |
| vicat | | ASTMD15255 | 166 °C |
| | ASTME831 | 1.6E-05 cm/cm/°C |
| specific heat | | ASTMC351 | 1050 J/kg/°C |
| thermal conductivity | | ASTMC177 | 0.22 W/m/K |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.
Compare