
POM C BK USA TPC
Properties:
granules
Product Description
Certificates(0)
Datasheet
Product Description
| Properties: | granules |
Certificates
No Data...
Technical Data Sheet
| Basic Performance | Test Condition | Test Method | Test Result | Test Unit |
|---|---|---|---|---|
| density | ASTM D-792 | 1.37 | g/cm3 | |
| Water absorption rate | 24hr | ASTM D-570 | 0.3 | % |
| mechanical properties | Test Condition | Test Method | Test Result | Test Unit |
| Impact strength of cantilever beam gap | 3.18mm | ASTM D-256 | 53.4 | J/m |
| bending strength | ASTM D-790 | 55.2 | MPa | |
| Bending modulus | ASTM D-790 | 2070 | MPa | |
| Elongation at Break | ASTM D-638 | 30 | % | |
| tensile strength | Yield | ASTM D-638 | 41.4 | MPa |
| Rockwell hardness | R-Scale | ASTM D-785 | 100 | |
| thermal performance | Test Condition | Test Method | Test Result | Test Unit |
| UL flame retardant rating | 1.5mm | UL 94 | HB | |
| Linear coefficient of thermal expansion | ASTM D-696 | 0.000072 | cm/cm/℃ | |
| Hot deformation temperature | 1.8MPa, Unannealed | ASTM D-648 | 76.7 | ℃ |
| Physical properties | Test Condition | Test Method | Test Result | Test Unit |
| Shrinkage rate | 3.18mm,Flow | ASTM D-955 | 2.1 | % |
| Electrical performance | Test Condition | Test Method | Test Result | Test Unit |
| Volume resistivity | ASTM D-257 | 1.0E+2-1.0E+5 | ohm·cm | |
| Surface resistivity | ASTM D-257 | 1.0E+5-1.0E+9 | ohms |
IMPORTANT NOTES: Plas.com collected the data in the data sheet from the material manufacturers. Plas.com makes the best effort to improve the accuracy of the data, but has no responsibility for the data. We strongly recommend verifying the validity of the data with the material manufacturers before making a final decision.